Your shopping cart is empty.
LAm114xA Plus
LAm114xA Plus
LAm114xA Plus
LAm114xA Plus
LAm114xA Plus
LAm114xA Plus
LAm114xA Plus
LAm114xA Plus

LAm114xA Plus

Active Coaxial Stage Monitor

LAm114xA PLUS is a plus Editions of the famous LAm114xA, using a new DSP and Amplifier module, ethernet controlled via Software X-NET, keeping the same desing and measures. 
To fulfil all the artist´s performance needs the LAm114xA PLUS aimed to provide the musicians a perfect listening on the most demanding situations. The LAm114xA Plus stage monitor incorporates advanced coaxial 14” B&C Custom made speaker and a high performance amplifier module, capable of generating 1,650W (rms) for a very high acoustic pressure, remotely monitored and controlled through ethernet by a PC using X-NET Software.
The design combines the voice reproduction clarity associated with 12” drivers with the bass extension typically of 15” speakers. The high-frequency reproduction is handled by a 2-inch exit, 3-inch voice coil, HF neodymium driver for the critical voice frequency range. 

NEXT-Audiocom-LAm114xaplus-banner
Versatile Use
The cabinet’s small footprint and low weight, combined with the absolutely linear and extended response at very high-pressure levels, makes the LAm114xA PLUS the well suited to both small and large venue use.
Clear and Powerful
The design combines the voice reproduction clarity associated with 12” drivers with the bass extension typically of 15” speakers. The high-frequency reproduction is handled by a 2-inch exit, 3-inch voice coil, HF neodymium driver for the critical voice frequency range.
NEXT-Audiocom-LAm114xa-open
NEXT-Audiocom-LAm114xa-plus-animation
The heart of the LAm114xA PLUS, is a 1650W ultra-efficient Class-D amplifier module releasing 1150W for LF section, and 500W for the HF section. Integrated universal mains power supply with PFC provides consistency and optimum performance, that offers both sonic punch, balanced sound as well as a rich and transparent,sound at any level.
X-Net Software
Onboard, advanced, powerful 96kHz/40bit SHARC DSP engine, monitored by built-in LCD screen with a preset loading encoder, can be remotely monitored and controlled through ethernet by a PC using X-NET Software.
NEXT-Audiocom-LAm114xaplus-xnet
The full-featured X-NET Software automatically identifies each device and allows simultaneous control of multiple devices through grouping facility. Everything you need to fine-tune the sound of your system is right there.
NEXT-Audiocom-LAm114xa-plus-Banner

Key Features

Technical Specifications

Product Type
Active Coaxial Stage Monitor
Frequency Response (-6dB)
55Hz - 19.000Hz
Nominal Coverage (-6dB)
80º Conical
Maximum SPL Pgm/Peak (calculated)
135dB / 138dB (Half-Space)
Low Frequency Driver
1 x 14" (355mm) / 3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver
1 x 2" (50.5mm) exit / 3" (76mm) VC, Neodymium, B&C custom speaker
Amplifier Technology
2-Channel UMAC Class D - Full Bandwidth PWM Modulator With Ultra-Low Distortion
LF Section Power
1150W
HF Section Power
500W
DSP Technology
96kHz / 40 bit SHARC DSP
Latency
1.5ms
DSP Adjustable Parameters
Filters: PEQ, FIR, hi/lo-shelving, all-pass, band-pass, hi/lo-pass | Limiters: RMS Voltage, Peak Voltage | Groups: Mute, Delay, Level, Polarity, EQ
DSP Presets
24 (4 User Presets)
Delay Adjustment
500ms (172m) on Input + 400ms (138m) on Groups
Control Type
Control via LCD and Encoder on the Back Panel | Control via Software using Ethernet - Max. Cable Length 70m
Audio Signal Inputs
Analog | AES (AESOP)
Input Connectors
1 x XLR | 1 x Neutrik EtherCON®
Audio Signal Outputs
Analog | AES (AESOP)
Output Connectors
1 x XLR | 1 x Neutrik EtherCON®
Protections
Clip Limiter | Temperature | Over Current | DC Protection | HF Protection
Operating Temperature Range
0ºC - 40ºC
Cooling Type
External Aluminum Heat Sink with Internal Speed Controlled Fan
Power Supply
UREC Universal Mains Switch Mode Power Supply (SMPS) with Power Factor Correction (PFC) and Standby Converter
Power Input
AC 100V - 240V 50Hz/60Hz
Mains Connector
Dual (IN/OUT) Neutrik powerCON TRUE1 TOP®
Power Consumption
225W
Special Features
Speaker Cabinet Auto-Identification via Software
Handles
1 on Each Side
Grille
Black Perforated Steel
Construction
Multi-Laminate Birch Plywood
Finish
Semi-Matte Black Polyurea Coating
Dimensions (WxHxD)
564 x 390 x 475 mm
Net Weight
21kg (46.3lb)
Accessories
Speaker Cabinet Auto-Identification via Software

Accessories